Mild Steel Mandrel bend 45deg

Mild Steel Mandrel bend 45deg

From: $9.58

Bends are standard radius, 1.5 x the diameter of the bend, with a material thickness of 1.6mm.

Bends can be expanded and notched for “slip joint” fitting. This may incur an extra charge.

SKU: SB02545 Category: Tag:

Description

Mild Steel Mandrel Bend 25mm – 152mm OD. 45 degrees

How do I choose the Type of Ends I need?

When purchasing Exhaust Components, please make sure that you are getting the right size and have the ends configured correctly.

    • ID = Inside Diameter
    • OD = Outside Diameter

You can think of the pipe with an ID end as being the Female end of the Pipe, and the OD ended pipe being the Male.  The OD will fit inside of the ID.

##Don’t forget your clamps to complete the job.  Most any clamp will work; it just needs to be the same size diameter as the exhaust pipe you are purchasing##

Additional information

Size imp/metric

1 1/2" (38mm), 1 1/4' (32mm), 1 3/4" (45mm), 1 3/8" (35mm), 1 5/8" (41mm), 1 7/8" (48mm), 1" (25mm), 2 1/2" (63mm), 2 1/4" (57mm), 2 3/4" (70mm), 2" (51mm), 3 1/2" (89mm), 3" (76mm), 4 1/2" (114mm), 4" (102mm), 5" (127mm), 6" (152mm)

Related products